HR Helical Rotor 200 - Solar System
The Helical Rotor (HR) System is based on the reliable Lorentz Pump and Controller, and is a larger capacity pumping system. Based on a 4 Module array the system is primarily a borehole pumping system, but can be used in a variety of surface pumping applications as well.

Overview - PS200 :-
- lift up to 50 m
- flow rate up to 2700 litres per Hour (HR) and 5000 Litres per hour as a Centrifugal pump (C)
- simple installation
- maintenance free
- high reliability and life expectancy
- cost-efficient pumping
- 2 years manufacturer's warranty against defects in material and workmanship
Controller PS200
- controlling of the pump system and monitoring of the operating states
- mounted at surface (no submerged electronic parts)
- two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
- automatic reset 20 minutes after well probe turns pump off
- protected against reverse polarity, overload and high temperature
- speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
- solar operation: integrated MPPT (Maximum Power Point Tracking)
- battery operation: low voltage disconnect and restart after battery has recovered
- max. efficiency 88 % (motor + controller)
- enclosure: IP 54 (sealed, weatherproof)
Motor ECDRIVE 600 HR / C :-
- brushless DC motor
- water filled
- IP 68, pressure balanced, max. submersion unlimited
- dynamic slide bearings, material: carbon/ceramic
- wetted material: stainless steel (AISI 316), POM, rubber, cable drinking water approved
Pump end (PE) :-
- high life expectancy
- non-return valve
- dry-running protection (optional)
- material: stainless steel (AISI 316), rubber
for HR pumps only :-
- helical rotor pump (positive displacement pump)
- two main parts only: stator and rotor
- stator: geometry made of abrasion resistant rubber
- rotor: stainless steel, hard chrome plated, abrasion resistant
- more resistant to damage by sand than other pump types
- self-cleaning
|
PS200 |
HR-04 |
HR-07 |
HR-14 |
C-5-4 |
|
article # |
1007-X |
1009-X |
1008-X |
1205 |
|
lift [m] |
0-50 |
0-30 |
0-20 |
0-15 |
|
max. flow rate [m3/h] |
0.8 |
1.2 |
2.7 |
5.0 |
|
max. efficiency [%] |
60 |
61 |
62 |
45 |
|
solar operation |
nominal voltage 24-48 V DC open circuit voltage max. 100 V DC |
battery operation only |
|
solar generator [Wp] |
80-300 |
80-300 |
80-300 |
|
battery operation |
nominal voltage 24-48 V DC |
|
|